Obviously if you are going to be growing plants for a long time or if you simply want to grow a large garden the buying of this commercial nutrient solutions is not an option and starting to make your own formulations - adjusted to your own needs - becomes the main priority. On today's article I will be speaking to you about how to prepare your OWN solutions using my nutrient solution calculator, carefully explaining to you what you need, where to buy it and what you should expect. I will guide you through making your own first A+B solution by YOURSELF getting all the chemicals and utensils you need easily and economically.
So what do you need to make your own nutrients ? The list below shows you the things you will need to start making your own A+B solutions. You will notice that you will need two scales since we are going to have to weight two "nutrient sets" with different precision, micro nutrients (which are used only in small amounts, need to be weight more precisely) and macro nutrients (which are used in larger amounts and therefore need scales with larger capacity).
- Scale that can weight down to 0.01 g at a +/- 0.01g precision (something like this is perfect, just search 0.01 g scale on ebay to view similar products)
- Scale that can weight up to 1kg at a +/- 0.1g precision (something like this)
- Two Empty one gallon containers with caps
- Plastic Spoon
- Plastic small container (to weight salts)
- A source of RO or distilled water (your tap water will NOT work)
- Download my hydroponic nutrient calculator here.
- Download the formulation you will be using here.
- Yara Brand Calcium Nitrate (here)
- Magnesium Sulphate Heptahydrate (here)
- Potassium Nitrate (here)
- Copper Sulfate Pentahydrate (here)
- Potassium Monobasic Phosphate (also known as mono potassium phosphate) (here)
- Manganese Sulfate Monohydrate (here)
- Zinc Sulfate Dihydrate (here)
- Sodium Molybdate (dihydrate) (here)
- Boric Acid (here)
- Iron EDTA (NaFeEDTA) (here)
Of course you may see right now that the initial investment might be significant (from 100 to even more than 500 USD depending on whether you buy 50lb or 1lb quantities of macro nutrients) however after this purchase you will be able to produce more than one hundred gallons of concentrated A+B solutions which would cost you more than 10 times the price you will be paying if you bought them commercially. After doing the math you will see that this is a GREAT way to save money and produce your own solutions ! Hey you could even start selling to the neighbors ! :o)
After you buy the chemicals simply open my hydroponic calculator and load the general_beginner.txt nutrient formulation file you downloaded earlier on the calculator (use the "add external" button on the "Desired Formulation" tab. Then click the A+B solution button and select the "calculate weights for specific stock solution volume" option and input 1 (choose gallon) on the edit box above it. Now go to the "nutrient salts used" tab and select the salts mentioned above (make sure you select Yara Calcium nitrate instead of the regular one) .It is now time to go back to the "desired nutrient formulation" tab and press the "calculate formula !" button. Your screen should look like the picture shown below.
Now that you have calculated the weights needed you should go to the "calculation results" tab where you will be able to find the weights of the different nutrients you need to prepare the solution. The results of the calculation are showed below. You should now follow these steps to prepare the solutions :
If the chemical weights more than 10g weight it on the "less accurate" 0.1g scale. If it weights less on the "higher precision" 0.01g model.
- Fill each one gallon container with half a gallon of RO or distilled water
- Weight one salt on the container you set apart for measuring. Make sure you always DOUBLE check the weights and the appropriate A or B gallon container you need to add the salt to.
- After you measure the salt transfer it to either the A or B gallon container (depending on which one it should go into). Use a little bit of water (RO or distilled) to transfer any remains that cannot be easily added and dry the container you are using to weight before measuring the next salt
- Shake the container where you added the salt and make sure it is fully dissolved before measuring and adding the next one.
- Do the same as above for all the salts
- After you are done adding the salts add half a gallon of water (again RO or distilled) to each container
- Then seal the containers and shake them vigorously
- You have just prepared your first batch of self-made nutrient solution ! (Yey !!)
It is very important now to keep your chemicals stored in air-tight container in a dark and cool place. Some chemicals like calcium nitrate will absorb moisture and become useless if you leave them in contact with air for prolonged periods of time !!!
Of course, once you are more comfortable with preparing your own nutrients you can go to the A+B+C tutorial or research the available literature for some custom formulations available to grow each one of your plants under its favorite nutrient levels. I hope this tutorial has allowed you to reach a new level in your hydroponic gardening experience, hopefully accompanied by a drastic reduction in your soil-less gardening costs !
Note : Please leave a comment with your experience with the tutorial and with any links, phone numbers or addresses of your local chemical suppliers (if you have already located some you like). I will add them to a future feature of the calculator which will hold a chemical supplier global directory :o).